CT CEM connector

SPECIFICATIONS

Stud connector with screw and toothed plate for concrete casting integration. Element composed of a Ø 14 mm shank of 10.9 hardened steel, with washer and 15 mm hexagonal head. The Ø 12 mm threaded body has a truncated conical section at the lower end allowing it to be inserted into the central hole of the 60 x50 x 4 mm stabilizing plate folded on two sides.

3D / BIM model Installation Downloads
More information
Description

CONNECTOR COMPOSITION

A Ø 14 mm shank of 10.9 hardened steel, with 15 mm hexagonal head and fake washer, and Ø 12 mm threaded body.
A 60×50 mm, 4 mm thick toothed steel plate with rectangular base. The stud connector and the base plate, thanks to their particular conformation, come together during the embedding process. All the connector components are zinc plated with an average protection thickness of 8 μm, corresponding to 2 cycles of “Kesternich” corrosion resistance.
This is the connector of the range with the higher shear resistance, for very demanding structural applications.

CODE HEIGHT PLATE
CTCEM14/040 40 mm 60 X 50 mm
Technical Details

Technical Details

Mean breaking load (Pum)
Characteristic breaking load (PRk) Design load (U.L.S.) Pd Allowable load (A.S.) Padm
35.7 kN 26.7 kN 21.40 kN 14.2 kN

The table shows the reference values relating to the tests carried out at the Laboratory of Building Science of the University Institute of Architecture in Venice (Italy). These tests were carried out according to the procedures indicated in Eurocode 4 ENV 1994-1-1.
The results shown are for connectors connecting a C25/30 concrete structure with a C25/30 concrete slab. The geometries of the two connected parts are such that the breakage surface of the concrete is not reduced due to thin sections.

Installation

Installation

Support/Download

Support/Download

CATALOGUEDownload
DATA SHEETDownload
INSTALLATION INSTRUCTIONSDownload
LABORATORY TESTSDownload
DWG DETAILSDownload
SoftwareDownload

Accessories

Concrete floors - Accessories

15 mm 1/2” socket

Concrete floors - Accessories

Impact wrench

Concrete floors - Accessories

Drill bit for concrete Ø 10 mm