MINI CEM-E connector

SPECIFICATIONS

Stud connector with galvanised screw for concrete casting integration. Element comprising a shank in hardened carbon steel with Ø 10 mm, 60 mm threaded body; a Ø 10 mm, 20, 30 or 40 mm stud with a pre-assembled 2,7 mm thick free-spinning steel washer 30 mm in diameter and a T40 Torx recess.

Installation Downloads

Description

MINI CEM-E is the new screw connector with CE mark, designed to join a thin slab (from 20 mm) with concrete floor joists, including those with reduced dimensions. This connector is recommended in particular for joining the joists to high performance fibre reinforced concrete slabs.
Thanks to the Hi-Low thread, it can be dry fixed into the support without the need for resins or other adhesives. Its free-spinning washer permits correct contact with concrete surfaces that are not perfectly level.

MINI CEM screw floor connector

CODE	HEIGHT	PLATE
MINI CEM-E 10/020	20 mm	Ø 30 mm *
MINI CEM-E 10/030	30 mm	Ø 30 mm*
MINI CEM-E 10/040	40 mm	Ø 30 mm*

* Connectors specifically conceived for reinforcements using reduced thickness fibre reinforced concretes.

Technical Details

Strength of existing concrete	Shear resistance PRd
C20/25 non-cracked	9.90 kN
C20/25 cracked	6.93 kN
C25/30 non-cracked	11.07 kN
C25/30 cracked	97.75 kN

The values indicated are calculated using the Eurocode formulae and indicate the pry-out failure of the existing concrete.
Shear strength Prd of the steel of the MINI CEM-E connector: 13.04 kN.

Installation

Support/Download

CATALOGUE	Download
DATA SHEET	Download
ETA CERTIFICATION	Download
DECLARATION OF PERFORMANCE (DoP)	Download
INSTALLATION INSTRUCTIONS	Download
DWG DETAILS (Italian)	Download
CALCULATION SOFTWARE	Download