Two-component epoxy resin

Supplied in 400 ml “Shuttle” cartridges.

RTEC400 resin is a two-component epoxy formula adhesive used for heavy-duty fixing on concrete, masonry and wood. It is supplied in 400 ml cartridges and is the ideal product for structural reinforcement with post-installed reinforcement bars.

Below are the estimated consumptions levels of epoxy resin depending on the diameter of the hole, the inserted bar diameter, and the depth of the hole.

RTEC 400 resin is only available as 400 ml two-component resin cartridge.

BAR DIAMETER	HOLE DIAMETER AND DEPTH	No. OF BARS INSTALLED PER CARTRIDGE
12	14×200 mm	19,5
12	14×300 mm	13,0
12	14×400 mm	9,5
16	18×200 mm	18,1
16	18×300 mm	7,9
16	18×400 mm	5,9

Caratteristiche meccaniche agli stati limite del connettore CTL MAXI al variare dello spessore del tavolato e classe del legno

Tavolato (cm)	Legno (classe minima)	Resistenza caratteristica Fv,Rk (kN)	Modulo di scorrimento allo stato limite di servizio Kser (kN/mm)	Modulo di scorrimento allo stato limite ultimo Ku (kN/mm)
0	C16, GL24	19,30	18,60	10,40
0	D30	24,50	21,20	13,60
2	C16, GL24, D30	15,00	7,68	4,35
4	C16, GL24, D30	11,30	3,06	2,66

• Valori caratteristici del connettore CTL MAXI per eseguire un calcolo secondo il metodo degli Stati Limite Ultimi Download (formato pdf)
• E’ possibile eseguire il calcolo dei connettori CTL MAXI utilizzando il software gratuito scaricabile nella sezione Download

VIDEO

Fasi di posa di un connettore Maxi sopra assito.

 

Posa di un connettore Maxi senza preforo

---

DOCUMENTI

Posa connettore Maxi

CT L POSA MAXI IT

 

CT L CATALOGO IT

 

CT L SCHEDA MAXI IT

 

CT L CTL CERTIFICAZIONE AVIS TECHNIQUE IT

 

CT L CTL CERTIFICAZIONE ETA EN

 

CT L CTL DOP IT EN

 

Specification

Supply and installation of Tecnaria RTEC400 two-component thixotropic epoxy resin for joining the concrete slab of the composite floor (wood, concrete, steel – concrete-reinforced concrete) to the perimeter walls using improved adhesion reinforcement bars. The product must be applied after drilling and cleaning the hole.

Installation

Technical details

It bears the CE mark having obtained two ETA approvals (European Technical Approval) making it an approved material for use with threaded rods and reinforcement bars inserted in concrete.
These properties make this resin the ideal product to be used in the application of masonry-floor connection bars.

Download the DOP for improved rebarshere

Download the DOP for threaded bars here

Supporto/Download

File Name	File Description	Download
ACT RESINA RTEC400 LISTINO EN	ACT RESINA RTEC400 LISTINO EN
ACT RESINA RTEC400 SCHEDA EN	ACT RESINA RTEC400 SCHEDA EN
ACT RESINA ETA140091 RTEC400 Rebar EN	ACT RESINA ETA140091 RTEC400 Rebar EN
ACT RESINA ETA140090 RTEC400 Rod EN	ACT RESINA ETA140090 RTEC400 Rod EN
ACT RESINA RTEC400 DOP ADERENZA IT	ACT RESINA RTEC400 DOP ADERENZA IT
ACT RESINA RTEC400 DOP FILETTATE IT	ACT RESINA RTEC400 DOP FILETTATE IT